Design and Implementation of a Low Cost USB Duplicator
Muhammad Usman Rashid, Zeashan Hameed Khan
Abstract
USB devices and flash disks are the most common storage device being used but very little work has been done on it at university project level. Considering the increasing capacity and popularity of USB flash disks, it is believed that in the near future they will replace CDs/DVDs and will be used as a primary storage medium. For this purpose, a USB flash disk duplicator will also be required just as a CD/DVD duplicator is required today. The aim of the present work is to develop a portable and stand-alone device capable of copying the contents of one USB flash disk/mass storage device to another USB flash drive without the use of an intermediary computer.
DOI:
https://doi.org/10.11591/eei.v1i4.249
Refbacks
There are currently no refbacks.
<div class="statcounter"><a title="hit counter" href="http://statcounter.com/free-hit-counter/" target="_blank"><img class="statcounter" src="http://c.statcounter.com/10241695/0/5a758c6a/0/" alt="hit counter"></a></div>
Bulletin of EEI Stats
Bulletin of Electrical Engineering and Informatics (BEEI) ISSN: 2089-3191, e-ISSN: 2302-9285 This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU) .