Design and development of photovoltaic solar system based single phase seven level inverter
Abstract
For solar photovoltaic (PV) systems, an upgraded triple gain seven-level inverter that works both independently and while connected to the grid is proposed. The two-stage configuration of the system is boost cascaded. The first stage has a one switch improved gain converter (OSIGC) to increase and normalize the input direct current (DC) voltage, and the second stage includes a unique seven level alternating current (AC) is produced via a multilevel inverter (MLI) design with triple voltage gain. The proposed OSIGC is appropriate for a broad range of conversions. The voltage gain in MLI was achieved using switched capacitor techniques. The DC-DC converter can achieve a maximum voltage gain of twelve and the MLI can achieve a maximum voltage gain of three, resulting in a DC-DC-AC voltage that can reach 36. Maximum power point tracking (MPPT) technique based on modified perturb and observe (P&O) is used in OSIGC to maximise PV module power utilisation, and MLI control utilises sinusoidal pulse width modulation (SPWM) realistically. For the purpose of analysing the suggested system, a 200 Watt prototype statel is created. With a total harmonic distortion (THD) of 0.181%, up to 92.12% of the converter system’s overall efficiency is possible.
Keywords
Boost multilevel inverter; Maximum power point tracking; Multilevel inverter; One switch improved gain converter; Solar photovoltaic system
Full Text:
PDFDOI: https://doi.org/10.11591/eei.v13i1.5168
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Bulletin of Electrical Engineering and Informatics (BEEI)
ISSN: 2089-3191
,
e-ISSN: 2302-9285
This journal is published by the
Institute of Advanced Engineering and Science (IAES)
.