High-Conversion-Ratio Bidirectional DC–DC Converter With Dual Coupled Inductors

Omid Khezri, Javad Javidan

Abstract


In this paper, a high-conversion-ratio bidirectional DC–DC converter with dual coupled inductors is proposed. In the boost mode, two capacitors are parallel charged and series discharged by the dual coupled inductors. Thus, high step-up voltage gain can be achieved with an appropriate duty ratio. In the buck mode, two capacitors are series charged and parallel discharged by the dual coupled inductors. The bidirectional converter can have high step-down voltage gain. The stress voltage of all switches can be reduced, and the switching loss and efficiency can be improved. The operating principle and the steady-state analyses of the voltage gain are discussed. Finally, in 24V for low voltage, and 400V for high voltage, and 200W for output power, this converter simulated in MATLAB.

Keywords


dc-dc bidirectional converter

Full Text:

PDF


DOI: https://doi.org/10.11591/eei.v3i4.309

Refbacks

  • There are currently no refbacks.




Bulletin of EEI Stats

Bulletin of Electrical Engineering and Informatics (BEEI)
ISSN: 2089-3191, e-ISSN: 2302-9285
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).